How to use the Universal Mount? What kind of accessories can I add with the Universal Mount?

Using the Universal Mount Plate

Many AG products are fitted with Universal Mount plates designed to fit a wide range of aftermarket accessories including AG Cupholder (sold separately). Plate accepts ¼-20 x 7/8” stainless mounting screws. Internal hardware is #304 grade Stainless and should be thoroughly rinsed with fresh water after ocean use.

Please be careful not to over-tighten mounting screws on the Universal Mount. If using common mounts, 7/8” length mounting screws generally fit perfectly, however, for non-standard mounts, different length screws may be required. To prevent overset screws, which can easily puncture the boat, the threaded mounts terminate in welded backing plates. The mounting threads allow approximately ¼” (7mm) depth before the mounting screw will bottom out on the backing plate. Do not force-tighten mounting screws. If overtightened, mounting plate nuts can be stripped, requiring replacement of the entire plate. 

Universal_Backing_Plates.JPG

 

What kind of accessories can I add with Universal Mount?

Here are some of our favorite accessories...

Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.